Welcome to The Conway Electric Store shop a collection below or call us for assistance: 310-498-8514. every order is produced by our small U.S factory and can take 2-3 weeks to ship. your patience is appreciated.

New! 6' Extō Surge 900 Smart Chip Surge-Protected Smart USB / USB Type C 6-Outlet Power Strip Bottle Rocket Red

Exto Surge 900 Smart Chip USBC


The First Modern Surge-Protected Smart-Chip USBC, 15AMP Resettable Fuse, Tamper-Resistant Power Strip for all of your devices

You can't prevent a surge, but you can protect yourself against one.

We designed and manufactured this product to replace ugly surge-protective power strips. Our intention was to create a striking monumental dedication to electricity in a daring form factor. A power strip you can display proudly instead of hiding timidly, with all of the features you need to power everything in a room. You can even turn it all off with the flick of a switch.

Overview

The Extō Surge 900 Smart Chip USB is a multi-functional surge-protected power supply designed for your home. The Extō Surge can handle up to 8 devices. Includes 6 tamper resistant 120V outlets for standard power plugs and 2 Smart Chip USBA/C ports for portable electronics. The outlets are controlled by a 15AMP chrome industrial on/off switch with dual green LED indicator lights (grounded, surge-active) on the first power bank displaying on/off grounded and surge-enabled status. The unit is backed up with a recessed, resettable 15AMP fuse for overcurrent protection - preventing current in excess of 15AMPs. 

Surge Protection

An electrical surge is caused by irregular increases in voltage. The most common electrical surge is a lightning strike, though surges can be caused by many other factors. You can read about surges in detail here. Surge energy is measured in Joules. Good surge protection is measured by how much energy can be absorbed before failure. A minimum joule rating is 200-400. A good surge protection rating is around 600 joules. The Extō Surge 900 Smart Chip USB is rated to 900 joules for high-energy absorption and protection from electrical surge.

  • Performance Data
  • MCOV: 150V rms
  • Joules Rating: 900
  • Nominal Discharge Current Rating: 3kA
  • Maximum Surge Current, Per Mode (Per Phase): 27kA (L-N:18kA, L-G:9kA)
  • Noise Rejection: -30dB at 500kHz-30MHz
  • VPR: L-N: 600V, L-G: 700V, N-G: 600V
  • Short Circuit Current Rating: 5kA
  • Diagnostics: Indicator Light

Smart Chip USB (2.4AMP) 4.0 USBC (3AMP)

The dual USBA/C ports include Smart Chip USB technology and a patented All DeviceTM layout for better plug management. The Smart Chip USB senses the connected device and sends it the fastest charge possible, reducing charging time with maximum current up to 4.0amps (2.4amps per-port). Smart Chip USB ports are USB 3.1 compatible and beyond.

Tamper Resistant Outlets

The 2014 National Electrical Code (NEC) requires tamper resistant receptacles to be installed in all new construction or replacement wall outlets. All of the outlets used in our extension cords include patented internally tamper-resistant outlets to prevent the insertion of unwanted objects, protecting against electrical shock. The internal gates will only release when both prongs of a plug depress the gate simultaneously. Though not required in extension cords, we have included TR receptacles in all of our multi-outlet products since our beginning. This makes homes safer for everyone, especially children, and is a feature not found in other extension cords.

Construction

Built of cast aluminum and stainless steel, the nearly 3lb heavy casing is designed to stay where you place it, is grounded, and the materials are fireproof. The cover is secured with flat stainless socket-head machine bolts. The housing can be screwed to a wall or other surface using the self-tapping screw holes on the underside.

Four non-marking urethane feet keep it from sliding and protect the surface wherever it sits. The 14 gauge, 3-conductor industrial cord is braided with cotton thread and permanently affixed to the housing with an approved strain relief device withstanding a minimum 35lb pull. Recessed 15AMP chrome industrial toggle for full on-off control while preventing accidental on/off. Recessed 15AMP resettable fuse for overcurrent and short circuit protection.

Ornamental silicone hole covers break the visual plane of the surface and protect the front in tight spaces.

The cord is 6 feet of industrial-quality 14 gauge extra-flexible wire rated to 15 AMPs. The plug is oversized, rubber-overmolded, three-prong grounded for easy grip. The cord has been FT-2 flame tested with good results.

Packaging is corrugate cardboard for low environmental impact

Every unit has a unique id plate with serial number and manufacturing location.

Measurements

Length: 6.375"

Width: 4.5625"

Height: 2.875"

Weight: 3.0 LB

Every Extō Surge 900 is assembled sweatshop-free in the United States of components from nearly 25 sources.

Every Extō is made in the USA with some imported components and is intended for use indoors with small appliances. If you're not sure which cord rating you need, please consult a professional. 

Patents Granted and Pending



Customer Reviews

No reviews yet Write a review


Related Items


Customer Reviews

Based on 4 reviews
50%
(2)
0%
(0)
25%
(1)
0%
(0)
25%
(1)
R
Richard Fischer
Next Level Quality

Wow! What a high quality product! This thing weighs over 3 lbs. Its bold color and sleek design make it a very cool choice for modern decor. I would highly recommend this company and their products! You will not be disappointed!

S
Sylvester

Have not received my order.

You wrote this review while your order was in transit by USPS and was delivered later that week. We hope you're enjoying both of your items.

A
Amy

Product is outstanding, but the ordering process is less than ideal. I waited over six weeks to hear anything other than the initial order confirmation, but when I finally asked “Where’s my order?” it was miraculously shipped out the next day. Coincidence or lazy customer service?!

Thank you for your review! We apologize for the long wait, I checked your order history and red was out of stock during that time so it must have taken a week or so for the factory to get the raw materials processed and finished. It would have been a coincidence on the shipping time after your inquiry as the factory has a set schedule they adhere to each day and we typically aren't able to interrupt it (they do prioritize backorders when components arrive). Unfortunately that happens occasionally and we appreciate all of the additional business you've given us since 2019.

J
Jean

Great !!! Ok